Using force display mode of output

By activating the option Force Display Mode to within your output’s settings, the source of an output – may it be the signal of a single camera or a grid of multiple cameras – can be displayed Graded , Bypassed , Original or with applied Exposure Assist .

Force display mode to

Other outputs will still listen to the individual slot’s display mode configuration – unless they are also forced to a certain display mode.

Exemplary scenarios:#

– In order to enable a continuous check of the exposure, an output can be used to always display false color of all live camera signals. To do so, activate “Force Display Mode to” in the output settings choose “Exposure Assist” as mode. All other outputs would then continue to listen to which mode is selected in the individual slots.

– In order toalways display the graded image and avoid interference from the activation of “Original” or “Exposure Assist” in an individual slot, an output can be set to always display the graded image. To do so, activate “Force Display Mode to” in the settings of the output and choose “Graded” as mode. All other outputs would then continue to listen to which mode is selected in the individual slots.